Application:Fit For Honda Accord VII 4-door sedan CL7 & CL9 2003-2008Fit For Honda Accord Euro 4-door sedan 2003-2008 (Australia and New Zealand)Fit For Acura TSX 2004-2008(North America and Canada)Ā Specification:Front top mount: Pillow ballRear top mount: Standard rubberDamping adjustable: Not availableCamber adjustable: Not availableHeight adjustable: Yes, lowering 25-75mm depending on the vehicle modelsSpring Rate Front: 10 kg/mm(560 lbs/in)Spring Rate Rear: 6 kg/mm(336 lbs/in)Front spring inner diameter: 70.5 mmRear spring inner diameter: 70.5 mmSpring length Front: 230 mmSpring length Rear: 230 mmSpring Preload advised: 7-10 mmColor: Red body with black springĀ Ā Package included:2x Front coil-overs2x Rear coil-overs2x C spannersĀ Ā Feature:1. Lowered height adjustment from 25-75mm (depends on vehicle models)which allows a lower center of gravity and also add a more aggressive stanceĀ 2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent3. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response.( for some models)4. CNC machined AluminumĀ top mounts and lockers-- - excellent strength, and save weight5. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable6. High tensile spring---Ā 600,000 times continuously test to assure its high tensile strength.7. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.8. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions9. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel PartsĀ Note:1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.Ā 3. Impact wrench is prohibited during the installation, it will loosen or damage the product.4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-5 months will keep it smooth and clean, which helps to extend the lifetime.Ā Noticeļ¼Ā 1.California Prop 65 Warning2. Authority IDļ¼MXR02FXSYļ¼Very important, please do not deleteļ¼
Description
Application:Fit For Honda Accord VII 4-door sedan CL7 & CL9 2003-2008Fit For Honda Accord Euro 4-door sedan 2003-2008 (Australia and New Zealand)Fit For Acura TSX 2004-2008(North America and Canada)Ā Specification:Front top mount: Pillow ballRear top mount: Standard rubberDamping adjustable: Not availableCamber adjustable: Not availableHeight adjustable: Yes, lowering 25-75mm depending on the vehicle modelsSpring Rate Front: 10 kg/mm(560 lbs/in)Spring Rate Rear: 6 kg/mm(336 lbs/in)Front spring inner diameter: 70.5 mmRear spring inner diameter: 70.5 mmSpring length Front: 230 mmSpring length Rear: 230 mmSpring Preload advised: 7-10 mmColor: Red body with black springĀ Ā Package included:2x Front coil-overs2x Rear coil-overs2x C spannersĀ Ā Feature:1. Lowered height adjustment from 25-75mm (depends on vehicle models)which allows a lower center of gravity and also add a more aggressive stanceĀ 2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent3. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response.( for some models)4. CNC machined AluminumĀ top mounts and lockers-- - excellent strength, and save weight5. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable6. High tensile spring---Ā 600,000 times continuously test to assure its high tensile strength.7. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.8. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions9. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel PartsĀ Note:1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.Ā 3. Impact wrench is prohibited during the installation, it will loosen or damage the product.4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-5 months will keep it smooth and clean, which helps to extend the lifetime.Ā Noticeļ¼Ā 1.California Prop 65 Warning2. Authority IDļ¼MXR02FXSYļ¼Very important, please do not deleteļ¼